WIFI Camera Q7, HD-Q7 User Manual

| Home | DV cameras |

 

 

Q7, HD-Q7

Install APP

 

After you enter the URL into the download interface www.scc21.net according to mobile phone operating system to download and install the appropriate software to watch. Or scan the QR code on the package to download and install.

Android Phones can also search "9527" in "Google play" and download


iPhone can also search "9527" in "App Store" and download.
 


● You can also scan QR code and complete the installation.

 

 
Android iPhone

 

LED specification

 

 Working condition (Mode)Red lightblue
1Initialized state (with a card)OffOn
2Initialized state ( with a card or being videotaping )OffBlink
3Internet status (no card or Pause videotaping)Long brightOff
4Low batteryOnOn
5Battery chargingNo statusNo status

 

 

Accession

Connect the power for the first time.

 

1. First toggle "Start button" boot and wait until the camera blue light flashing or on (if 60 seconds later the blue light didn't flashing or on, please long press the reset button for 3 seconds), then use a mobile to search the WiFi hot spot signals: Q7 or HD-Q7 (code: 12345678) emitted by camera.

 

2. After the successful connection of Q7 or HD-Q7, using a mobile phone to open the operating software ---> find "local" page —> click "settings" then select "unlimited network settings" —> enter your home router username and password -->1 minute later, succeed or failed —> If failed, the camera return to the initialized state and the blue light flashing or on —> If succeed, the red light flashing or on.

 

3. After the success of joining the network, select "remote" and then enter the account and password behind the camera body, or scan the QR code, then you can watch global real-time video.

 

Reasons for the failure to join the network and precautions.

1. Wrong input of the router account password.
2. TF card malfunctioning, please formatting.
3 Router too long without rebooting to assign IP addresses.
4. Close the router as far as you can for optimal viewing.

 

TF card recording

Turn off your camcorder, put the TF card into the slot, the camera automatically record and save. Press the reset button once, the camera stops recording video, and save the current video. Video files saved in 5 minutes a period and the cycle camera. When we need to read TF card file, please use a card reader.


Night Open

Open Video. Click button to turn night Iight.

 

Forget your camera password

1. First toggle "Start button" boot and wait until the camera blue light flashing or on (If 60 seconds later the blue light didn't flashing or on, please long press the reset button 3 seconds), then use a mobile to search the WiFi hot spot signals: Q7 or HD-Q7 (code: 12345678) emitted by camera.

2. After the successful connection of Q7 or HD-Q7, using a mobile phone to open the operating software —> find "local" page —> click "settings" —> then select "unlimited network settings" —> enter your home router user name and password —> 1 minute Iater, succeed or failed —> If failed, the camera return to the initialized state and blue light flashing or on —> If succeed, the red light flashing or on.

3. After the success of joining the network, use mobile to open the operating software, find "local" page click "setting" --> choose "system setting" again --> "reset to defaults" --- wait for 60 seconds (After the successful recovery, there is the original account password.)

 

Related parameters

 

Name WIFI / P2P network camera
Video format AVI
HD-Q7 resolution 1280*720P
Q7 initialized state resolution640*480 VGA
Q7 network resolution320*240 QVGA
Video frame rate10fps±5fps
StorageSupport TF card storage, expandable up to 32G
Support systemWindows, ISO, Android
Charging VoltageDC-5V
Interface TypeMini 5/ 8P / Micro USB
Storage supportMicro SD Card (TF Card)
Type of batteryHigh-capacity polymer Lithium battery

 

 

Q5Mini DVSQ8

 

WIFI Camera Q7, HD-Q7© «org-info.mobi»