GPS TK905 |
| Home | User Manual | TK905 | |
This product TK905 is a 2G GSM GPS Tracker which is working based on the existing 2G GSM/GPRS network and GPS satellites, it can locate and monitor any targets remotely by SMS, mobile APP and web tracking software! FunctionsGPS+LBS Dual Positioning Ways: If the gps signal is good, the device will locate via gps satellite, if not, the device will locate via LBS! Under GPS locating mode, the accuracy is 5-10 meters, under LBS locating mode, the accuracy is 100-1000 meters! Realtime Tracking: You will can realtime track the device on google maps via mobilephone, tablet and computer, and the minumum data upload interval is 10 seconds! History Route Playback: The APP and web server can record the upload data of the device up to 6 months, you will can playback the history route at any time! Long Standby Time: It has built-in 3.7V 5000mAh Li-ion battery, can standby up to 90 days. Powerful Magnetic: It has 5pcs built-in magnets,with super strong powerful magnetic, can be very easily installed. Waterproof: The waterproof level of this device is IP65, it can resist splash water but can't be put under water! Remotely Voice Monitor: Send "Monitor+Password" to the device first, then the device will turn into monitor mode, now if you make call to the SIM number in the device, it will pick up your call automatically and you will can monitor the voice around the device! Overspeed Alarm: This alarm works only under continuous positioning mode.When the unit speed is exceed the speed you presetted, it will send message “speed alarm!” to the admin number every 5 minutes. Shake Alarm: After you did the shake alarm setting, please keep the tracker being stationary for 5 minutes, then this function will start working. It will send SMS “sensor alarm!” to the admin number when the unit get shocked. Movement Alarm: When the units stays immobile in a place for 10 minutes, the user can set up the movement alarm by this command "move+passord", then in case the device moved 500m it will send alarm SMS "Move Alarm+Latitude and longitude" to the authorized number. Geofence: Set up a geofence for the tracker to restrict its movements within a district. The unit will send alarm information to APP and web server when it goes out of or get in this district. Sleep Mode for Saving Battery:
User ManualAbout the SIM card- Please prepare a sim card, write down your SIM card number. - Insert the sim card prepared into gps tracker. When you insert the SIM card to the device, Blue and yellow indicator light will flash once every 3 seconds, or you call the SIM card, it answering busy or you heard it rings and then the call fails. That’s mean the device has received the GPS signal, you can go on.. - After done that, please reinsert the sim card into the tracker, using your phone to call the trackers again. If it works, you will receive location SMS with google maps link. If it can’t reply location SMS, please kindly contact us by email.
Tracking by SMSPlease send the following SMS command 1. Locate SMS command: g123456# 2. The command of set admin number : admin123456(space)XXXXXXXXXX 3. The command of cancelling admin number : noadmin123456 4. Reset command: reset123456 5. Vibration alarm Command: shock123456 The command of cancelling the vibration alarm: noshock123456 Pls keep the tracker being stationary for 5 minutes, it will takes five minutes to take effects. Set the power saving mode1. Sleep by time mode setting: 2. Sleep by shock mode setting:
Tracking by APP:Please scan the QR code in the manual or the search «tkstar gps» from google play store/apple store to download the application «TKSTAR GPS». 1. If you only have one tracker, please log in the application via IMEI number. (On the back of the tracker). The default password is 123456 2. If you have serveral trackers, you can contact us to request for creating an account to manage there trackers. And then, you can log in the apllication by username and password. 3. If you have problems in using the application, please contact us for assistance.
Tracking by WebLog in the webiste: www.mytkstar.net (as the same way as logging in to the app).
How To Set APN1. How to get apn information? 2. The steps of setting APN: Command: gprs123456 Command: Apn123456 apn name Command: Apnuser123456 username Command: Apnpasswd123456 password Please send a second command after receiving the reply of the first command. Eg: The SMS commands are:
Our ServicePlease contact us by email or whatsapp if there is any problem. We will reply you as soon as possible in 24 hours. |
tkstar gps tk905 |
---|
© «Org-Info.Mobi» |