DEKO DKGG60

User's manual:

Before connecting the gun to the mains:

1. Fix the supplied metal stand to the gun.
2. Place the gun on the stand.
3. Fill the gun with glue cartridges through the special hole. After connecting the gun to the mains, it is recommended to wait until its tip heats up (5 minutes), then start using it.

When you turn on the gun for the first time, you may smell a peculiar smell. This is normal and will disappear after a short period of time.

To ensure a reliable connection, it is recommended to degrease the surfaces to be glued before applying the glue.

It is recommended to apply the adhesive in stripes or frequent dots. Bonding the surfaces to be glued should be done immediately after
applying the adhesive.

After finishing work, you should:

1. Unplug the gun from the mains.
2. Wait for the gun to cool down.
3. Store the gun in a dry place out of the reach of children.

Unused glue cartridges may remain in the gun after completion of the job.

ATTENTION! It is recommended to take a 10 minute break after 20 minutes of non-stop gun use.
Indoor use only.
The glue gun contains a heating element that heats the glue stick to 120 ° C.
Avoid getting hot glue on exposed skin. Thermal burn possible. In case of thermal burn, see a doctor.

Precautions:

Avoid dropping the gun.
The product is operated at an ambient temperature of 1 ° C to 40 ° C and a relative humidity of no more than 80%.
Do not immerse in water.

Specifications:

Power: 60 W
Voltage: 220 V
Frequency: 50 Hz