iMini Wi-Fi Camera

iMiniCam 1080p Wireless Spy Camera.

• Remotely viewing the live footage through the APP. This Charger hidden camera work with an APP which can help you remotely view the live footage. So this is a perfect way for you to monitor your home security when you are away, easily to keep your eye on your elder parent if they in nursing home or watch your kids to see if they are doing to with the nanny. Seriously, the uses for this charger spy camera are limitless.

• Motion Detection Alert & Push Notification to Your Cellphone. If there is any movement happen in the capture range of this charger hidden camera, it will immediately send you a motion detection alert to your cellphone and automatically record the video at that moment and save in the SD card. So you will be fully informed and get the evidence if anything bad happen in your house.

• Built-in battery (80 mAh) to save the last video from sudden disconnection from outlet. It can record continuously or motion activated with crystal-clear video and without too much heat or damage your SD card.

User and Installation Guide

Download the iMiniCam App

Option 1: Search « iMiniCam » on the App Store or Google Play and download.

Option 2: Scan the QR code below through any QR scanning app. You will be navigated to the following page. Select a means of downloading that is suitable for your device.

Setting up your iMiniCam

Add a new online camera via the iMiniCam app and Wi-Fi

1. Plug the iMiniCam device into a functioning electrical outlet.

2. Reset the device by taking the included pin tool and push and hold the button for about 5 seconds. Wait another 30 seconds for the reset to complete. The indicator light should flash and when complete, will stop flashing and turn off entirely.

3. Open your phone’s Wi-Fi settings and search for the iMiniCam’s Wi-Fi signal. The Wi-Fi address will be a long series of letters and numbers and also acts as the device’s unique UID. This UID can also be found on a sticker on the side of the iMiniCam device. This sticker also has a QR code you can scan to easily copy the UID.

4. Once found, connect your phone to this Wi-Fi. If after 3 minutes the iMiniCam’s Wi-Fi does not appear, reset the device and try again.

5. Open the iMiniCam app on your phone and click the (+) button in the top right corner to add the new camera.

6. Click « Add new online camera » and the device’s Wi-Fi address should appear in the following page titled « Search (LAN) ». Select it to add it as a new device. If the device does not appear, check that your phone is connected to the iMiniCam’s Wi-Fi with the UID.

7. When prompted for a password, the default password is 8888.

8. Navigate back to the home screen «Live Video» and the newly added camera should appear online. It will display its UID, which will also match its Wi-Fi code.

Adding a New Camera Manually

1. Once a camera has already been previously set up, you have the option to later connect the camera manually using the camera’s UID.

2. In the iMiniCam app, click the (+) button in the top right corner and select the option to «Add new camera manually».

3.  You can rename your camera to something like “Living Room” or “Office.”

4. Retrieve the device’s UID (either on the outside surface of the iMiniCam or from it’s Wi-Fi address) and manually input it into the UID space.

Tip: Use a QR scanner to scan the sticker code to easily copy and paste the UID into the app.

5. You can also update the device’s password. The default password is 8888. If you choose not to update the password, you will later be prompted to change it for added security. You can choose to Skip that step or Change your password.

6. Press «OK» to set up the new device.

7. Navigate back to the home screen «Live Video» and the newly added camera should appear online.

Live Feed

When your camera or cameras are online, they will appear in the Live Video feed on the app’s home page and will display their individual UIDs. To view a single live feed, click on the camera. If you have not updated your password, you will be prompted to either change your password or skip that step.

In Live Video viewing mode, there are helpful buttons to enhance your surveillance experience.

Live Video Feed:

Color Correcting: click to adjust color of video
Brightness: click to adjust brightness
Night Vision Mode: turn on Night Vision mode for use in low light
LED light: click to turn LED light on/off
Resolution: adjust resolution / video quality
Speaker: turn speaker on/off (N/A)
Microphone: turn microphone on/off (N/A)
Snapshot: click to take a picture of your recording
Record: click to begin recording video
Horizontal Flip: click to flip the camera’s view horizontally. This will update the view for others who have access to your camera.
Vertical Flip: click to flip the camera’s view vertically. This will update the view for others who have access to your camera.

Night Vision Mode
The camera still capture sharp images even with limited or no light.

Record
The Record feature allows you to begin live recording camera feedback.
You can watch and save recordings in the app and have the option to save it to an SD or share it with others.

Snapshots
The Snapshot feature allows you to take still images of recordings and save them to your photos or share them with others.

Camera Settings
To manage each device’s settings, click the gear icon on the right of the camera’s feed.

Device Settings
Here, you can modify, delete or reconnect the device and also manage the device’s individual settings. In Device Settings you can configure advanced settings like specific alarm notifications, motion detection settings, time, recording settings and much more.

Specific Device Settings:

1. Alarm Configuration
Alarm Config. Settings contain the most important and helpful features of the iMiniCam. These settings allow you to manage your push notifications and activity alerts from your camera. Adjust motion detection sensitivity or disable it altogether. Set an alarm schedule of when and how you want to receive alerts. You can choose to get push notifications and/or on-screen display alerts when the camera notices movement. See following page for detailed alarm settings.

Motion Detection Sensitivity: adjust your camera’s motion detection sensitivity on a scale of 1-7 or disable it altogether.
Alarm Schedule: set a specific start and end time range of when to receive alerts.
Warning Tone: choose to receive a warning sound with your alert.
Alarm Interval: specify how often you want to receive alerts by specifying an interval of time in seconds.
Push Notifications: choose to receive push notifications or turn them off.
On-Screen Display: choose to receive on-screen alerts (third picture) or turn them off.

2. Wi-Fi Configuration
Connect the device to your own Wi-Fi network to allow for remote viewing.

Remote Viewing Set Up
1. In Device Settings, go to «Wi-Fi Config» and select your network.
2. Input the password and select «OK».
3. The app will prompt you to allow the device to reboot. Click «OK».
4. Reboot will take about 40 seconds.
5. Once reboot is complete, the device is ready for remote viewing and you and anyone else with the iMiniCam app who has connected this camera will be able to watch your feed either while connected to your Wi-Fi network or to a cellular network.

3. SD Card Record Configuration
Manage your SD card recording settings, resolution, and set a length of time you want the camera to record. Click «Record»

4. Time Settings
Adjust your time zone and preferred time telling format. Even indicate whether to observe Daylight Saving Time.

5. Miscellaneous Settings
Choose whether to keep the LED indicator light on or off.

6. Change Password
Change your password any time. If you forget your current password, reset the device by using the included pin and holding the button for 10 seconds. The default password is 8888.

7. Device Reboot
Reboot the device if necessary.

Once you configure the device settings to your specifications, your iMiniCamera system is now ready for use.

Additional Information

LED Light Flash Key:
• Blue light: power on
• Red light: Wi-Fi
• Purple (red and blue) light flashing: connecting
• Solid light: camera is operating

Product Features
• Wireless Camera and USB Charger
• Secure Wi-Fi connectivity
• 1080p / 720p / 640p video recording
• Motion Detection up to 6 meters
• 32GB built-in memory
• USB Charging
• SD Card slot for additional memory
• Indicator light with On-Off functionality
• Reset button

Product Specifications
• 1200 Mega CMOS
• Video recording format: AVI
• TF memory card (included)
• Compatible with iOS and Android devices
• Operating temperature: -10°C to 60°C
• Storage temperature: -20°C to 80°C