In regions subject to freezing temperatures, drain, clean, disassemble and properly store the spa set and related components indoors when the temperature drops below 4°C (39°F). 1. Drain and clean the spa following the "Spa Tub Drainage" and "Spa Tub Cleaning" sections.
2. Reverse set up instructions to deflate and disassemble the spa tub, spa control unit and spa cover air bladder.
3. To deflate the tub and the cover air bladder:
a) Open the deflation outlet cap (27) with the included bolt wrench (6) (see drawing 19).
b) Insert deflation hose adaptor (28) into the deflation outlet.
c) Insert inflation hose (7) over the deflation hose adaptor (28).
d) Insert the other end of the inflation hose into the tub air valve or cover air bladder valve.
e) Press the air bubble  button to deflate.
f) When deflation is completed reverse above steps and ensures the deflation outlet cap (27) is securely fastened.
Caution: Only use for the purpose described in this manual.
Keep the inflation hose away from water or small objects when the deflation function is activated to avoid damage to the blower motor.
4. Make sure all the spa components and accessories are thoroughly clean and dry before storage. Air-dry the spa tub in the sun for an hour before folding.
5. Fold the spa tub loosely and avoid any sharp corners to prevent damage or leakage to the spa tub liner.
6. Prepare additional new cartridges for next time use.
7. Store the spa tub and accessories indoors, in a dry, temperature controlled, between 0°C - 40°C (32°C - 104°F), storage location.
8. The original packing can be used for storage. 
 ● 
|
