QuikCapture

CAPTURING VIDEO WITH QUIKCAPTURE

1. With the camera powered off, press the Shutter button [].

Your camera powers on, beeps several times, and automatically begins capturing video. The camera status lights blink while the camera is recording.

2. To stop recording, press the Shutter button [] again. The camera stops recording, beeps several times, and automatically powers off.

To capture other types of video or photos, see Capturing Video and Photos (page 5).

CAPTURING TIME LAPSE PHOTOS WITH QUIKCAPTURE

In addition to showing how a scene changes over time, time lapse photos are also useful for capturing a series of photos to be sure you get the shot you want.

1. With the camera powered off, press and hold the Shutter button [] for three seconds until capture begins.

Your camera powers on, beeps several times, and automatically begins capturing time lapse photos. The camera status lights blink once for each photo captured.

2. To stop capturing, press the Shutter button [] again. The camera stops recording, beeps several times, and automatically powers off to maximize battery life.

To capture other types of video or photos, see Capturing Video and Photos (page 5).

TURNING QUIKCAPTURE OFF

QuikCapture is on by default, but you can turn it off, if needed.

1. From the main screen, swipe down.
2. Tap Preferences > QuikCapture.
3. Tap Off.

●